Forge Motorsport Hyundai i30N MK3.5 (Facelift) Oil Cooler

Forge Motorsport Hyundai i30N MK3.5 Facelift & Kona N Turbo Inlet Adaptor

With Forge leading the way in aftermarket products for the new Hyundai’s, we are proud to present our turbo inlet adaptor for the MK3.5 i30N. After investigation we found the new turbo to be larger on the latest MK3.5 I30N giving even more reason to have this superb product as the newly refreshed design needs to flow even more air than its predecessor. After stage one or two tunes the performance yields are even greater than the previous model with even better driving response and improved higher end BHP gains.

This will NOT work with the OEM intercooler. This product will only work with aftermarket intercoolers with an outlet size of 63-67mm (Cold Side). It works flawlessly with the Forge intercooler FMINT15.

After already developing many performance upgrades for the Hyundai I30N & Veloster N the Forge Motorsport engineers have found another area for improvement of Hyundai’s Hot hatch. This time it is the boost pipe which runs from the outlet of the intercooler to the intake manifold.

Here we present FMCT5, a twin catch can and coolant expansion tank system. This design has been subject to a vast amount of development and is a one of a kind product in the marketplace. 

Hyundai i30N/Veloster N Turbo Inlet Adaptor

 

Hyundai Kona N 2022 - replaces GB16897

In Car Boost Fitting Kit for Ford, Fiat, and Renault

This reinforced silicone intake hose fits the 2 litre turbo Mk7 Golf, Seat Leon Cupra 280R and Audi S3 2.0l TSI (8V Chassis). Due to its location it really improves the looks of the engine compartment and removes any restriction of the OEM plastic hard pipe.

Induction Kit for Audi TTS.

The kit is suitable for the Citroen DS3 1.6 Turbo,the Peugeot RCZ THP 156 and the 207 GT/GTi  We use a custom designed Silicone Hose combined with a non-oiled Pipercross foam high flow filter . Everything needed is supplied in the kit, including the highest quality stainless steel clamps.

It uses a carbon fibre canister to house one of our high flow air filters. The aluminium components are hand fabricated in our UK headquarters.

Hose Clamp Set for FMTTUHOSE

Forge Motorsport are excited to release our industry leading intake for the Hyundai i30N. This aftermarket cold air intake system improves your i30N’s airflow in several key ways. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. The aftermarket system also improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. Finally, the cold air intake system is set up to allow cooler air to easily flow into your engine

This induction kit has been developed to fit Mini (Generation 3) vehicles fitted with a Bosch intake sensor part Number: 0 281 006 597.  Before purchasing this item please use the photo guide on this page to correctly identify the intake sensor fitted to your vehicle.

The kit comprises full replacement intake piping made from fully mandrel bent aluminium which is powder coated black. We use only 70mm diameter tubing which will not cause any issues with the MAF sensor readings. The filter is a PiperCross high flow cone filter housed in its own enclosure situated at the front of the vehicle. Everything is connected via high quality silicone couplers and stainless steel hose clamps.

Please note: The pipework in this kit is only available in a crackle black finish.

Induction Kit for R32 Mk5 Golf

This Forge Motorsport intake kit is for the SKODA FABIA 1.0 TSI 2017 onwards.

Induction Kit for Skoda Fabia 1.4 TSI

Forge are excited to present our Hi flow intake system for the Suzuki Swift Sport.

Induction kit for the 3.2 Audi A3

Induction Kit for the BMW Mini Cooper S Turbo

With Forge products the performance and quality always comes first, and this kit really goes out it's way to prove it. With a re-design of the inlet pipe work in alloy, and teaming up with the engineers at PiperCross, who have become famous for extracting extra horsepower on the British Touring Car circuit, we now have a kit which unleashed an extra 17BHP on our Ford Focus ST250 test car.

Following a running change to the 2015 Ford Focus ST250, we have re-engineered this performance induction kit to suit. Quality CNC Mandrel bent alloy inlet pipe work with no joins, quality 4 ply silicone hoses, and a high performance PiperCross filter increase filtration and flow.

Induction Kit for the SEAT Ibiza 1.2 TSi

Induction Kit for the 1.2/1.4 TSI 2015 Onwards

Users of this kit have reported back on the ease of installation and a sportier sound without being obtrusive. The benefit of installing this kit is even greater on mapped vehicles, when the OEM filtration system becomes a limiting factor to performance gains.