Motor Tilbehør | VW Passat B5 3B (1996 -2000)

This high-quality, performance engineered diverter valve is designed to replace the factory plastic diverter valve, which is a common source of boost leaks. Unlike the OEM valves, which use a fragile rubber diaphragm that is prone to failure, the 034Motorsport Diverter Valve features a high-performance spring and piston design. This means that the valve lasts much longer, and is capable of handling increased boost pressure.

The 034Motorsport Bypass Valve is fully serviceable and rebuildable.

This high-quality, performance engineered diverter valve is designed to replace the factory plastic diverter valve, which is a common source of boost leaks. Unlike the OEM valves, which use a fragile rubber diaphragm that is prone to failure, the 034Motorsport Diverter Valve features a high-performance spring and piston design. This means that the valve lasts much longer, and is capable of handling increased boost pressure.

The 034Motorsport Bypass Valve is fully serviceable and rebuildable.

Fully reinforced silicone breather hose is designed to replace the crumbling, leaking OEM rubber part. Prevent boost leaks and replace a common failure point with this durable, performance engineered part made from high-quality automotive silicone.

This hose runs from the bottom of the intake manifold to the check valve attached to the lower block breather hose.

This complete silicone hose kit is designed to replace all of the crumbling plastic and rubber awfulness that is the factory breather hose system.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Audi B5 A4/S4/RS4 & C5 A6/Allroad 30v V6 (2.7T, 2.8L) Phenolic Intake Manifold Spacer, 5mm Thickness to Prevent Heat Conductivity to the Intake Manifold From the Cylinder Head.

Audi B5 A4/S4/RS4 & C5 A6/Allroad 30v V6 (2.7T, 2.8L) Phenolic Intake Manifold Spacer, 5mm Thickness to Prevent Heat Conductivity to the Intake Manifold From the Cylinder Head.

Audi B5 A4/S4/RS4 & C5 A6/Allroad 30v V6 (2.7T, 2.8L) Phenolic Intake Manifold Spacer, 5mm Thickness to Prevent Heat Conductivity to the Intake Manifold From the Cylinder Head.

Fitment guide:

• Audi A4 (1996-2001) B5, 1,8T 
• Audi A4 (2002-2005) B6, 1,8T 
• VW Passat (1998-2005) B5/B5, 1,8T

034Motorsport made this manifold for you. Using high-temp rated, high-silica content cast iron, this manifold is a direct fit for OE turbo installation, with 50% larger runners for significant improvements in flow.

Dette komplette silikoneslangesæt er designet til at erstatte al den smuldrende plastik og gummi forfærdelighed, som er fabrikkens udluftningsslangesystem. 034Motorsport Billet PCV kontraventil er inkluderet i dette sæt!

We're pleased to offer this high-temperature silicone replacement N75 Hose for the B5/B6 Audi A4 1.8T and B5/B5.5 Volkswagen Passat 1.8T! Each vehicle has two of these hoses! One hose runs from the N75 valve to the wastegate actuator, and the other hose runs from the N75 valve to the compressor housing.

The VW and Audi 1.8T engine, due to the proximity of the coils on the valve cover near the exhaust, suffer from harness degredation. Our harness solution uses automotive grade wiring and harness building materials designed to withstand years of abuse and offer an affordable, elegant solution.

Audi, VW, SEAT, and Skoda MAP Sensor Mounting Tube

Please enter size of mounting tube in commentary section box in the basket:

• 60mm Diameter 110mm Long
• 60mm Diameter 240mm Long
• 63mm Diameter 110mm Long
• 63mm Diameter 240mm Long

Please enter your choice for heat resistant tape as well:

• With Heat Resistant Tape + £20.84 (exc VAT)
• Without Heat Resistant Tape

From chassis number:3B-X-000-001
OEM-Partnumber: 0781 980 012C