Tired of swapping ICMs and coils around trying to figure out the source of pesky misfires? Looking for improve idle or want run larger spark plug gaps?

The 034Motorsport C5 Audi RS6 4-Wire Coil Conversion and ICM Delete Harness for the 2.7T is a plug-in solution to eliminate the troublesome factory Ignition Control Modules (ICMs) and upgrade from the pricey factory coils to more affordable and reliable ones found in the C5 Audi RS6 4.2L V8 Twin-Turbo.

This exhaust manifold hardware and gasket kit includes new exhaust manifold to cylinder head gaskets, studs, and nuts. This kit can be combined with our 2.7T Turbo Installation Hardware Kits for a comprehensive solution when replacing the exhaust manifolds and turbochargers on your B5 Audi A4/RS4 or C5 Audi A6/Allroad 2.7T.

These CNC machined billet aluminum adapter plates allow you to install newer, more reliable 2.0T FSI coils on your 1.8T 20V, 2.7T 30V, or 4.2L 40V.

Installation hardware is included!

Audi B5 A4/S4/RS4 & C5 A6/Allroad 30v V6 (2.7T, 2.8L) Phenolic Intake Manifold Spacer, 5mm Thickness to Prevent Heat Conductivity to the Intake Manifold From the Cylinder Head.

Audi B5 A4/S4/RS4 & C5 A6/Allroad 30v V6 (2.7T, 2.8L) Phenolic Intake Manifold Spacer, 5mm Thickness to Prevent Heat Conductivity to the Intake Manifold From the Cylinder Head.

Audi B5 A4/S4/RS4 & C5 A6/Allroad 30v V6 (2.7T, 2.8L) Phenolic Intake Manifold Spacer, 5mm Thickness to Prevent Heat Conductivity to the Intake Manifold From the Cylinder Head.

This hose set is designed to replace the failure-prone factory rubber hoses with boost-friendly automotive silicone ones. Features durable, high quality silicone hoses which were modeled directly off of the factory parts to ensure perfect fit and finish. Unlike Samco hoses which are too thick and overbuilt, our 4-ply reinforced silicone hoses are more supple, easier to install, and more resistant blowing off as the clamps hold them more tightly.

The finest quality reinforced silicone MAF hose for the RS4. Designed to go from the RS4 MAF to the 2.7T or RS4 Y-Pipe, this hose is a drop-in replacement for the OEM RS4 MAF Hose. Directly modeled off the OEM hose to ensure optimal fitment.

The finest quality reinforced silicone MAF hose for the S4/A6/Allroad 2.7T. Designed to go from the S4/A6/Allroad 2.7T MAF to the 2.7T Y-Pipe.

These 85mm Inside Diameter Hitachi MAF Housings are designed for use in modified B5 Audi S4/RS4 & C5 Audi A6/Allroad 2.7T cars running upgraded RS4 K04 or larger turbos with appropriate software and matching fuel injectors.

Precision CNC machined in-house from billet aluminum, these housings maintain a constant 85mm inside diameter, and can be used with our stock airbox adapters, or 3.5" silicone couplers.

034Motorsport Acceleration-pakker indeholder etapevis opgraderingspakker, der er specielt skræddersyet til B8/B8.5 Audi S4 eller S5 drevet af den superladede 3.0 TFSI. 034Motorsport Acceleration-pakkerne indeholder håndudvalgte produkter fra det ekspansive 034Motorsport-katalog, sammensat af det erfarne 034Motorsport Engineering Team, for at tilbyde trinvise motor- og kraftopgraderinger til den 3.0 TFSI-drevne Audi S4 eller S5!

034Motorsport Dynamic+ Tuning Software til B8/B8.5 Audi S4 & S5 drevet af 3.0 TFSI er designet til at levere ultimativ kraft med uovertruffen køreegenskaber, kompromisløs pålidelighed og forbedrede funktioner og funktionalitet ud over, hvad der er leveret i fabrikskalibreringen. 034Motorsport Acceleration Pakker giver ejerne mulighed for at opleve det, vi kalder Dynamic+ Experience i tre, klar til at blive installeret, pakker!

034Motorsport Boost Tap Kit til EA839-drevne B9/B9.5 S4/S5/SQ5 er designet til at være en simpel, plug-and-play enhed for nem adgang til overvågning af motorboost og vakuumniveauer. Konstrueret til at erstatte den originale afstandsstykke mellem gashåndtaget og ladetryksrøret vil denne fræsede aluminiums boost tap aldrig warp eller revne.

034Motorsport Boost Tap Kit er en ideel løsning for dem, der kører boostmålere.

Installation Anstrengelse: MILD

De Brisk Racing DR10S tændrør er højtydende tændrør, der er ideelle til biler med performance-software opgraderinger og/eller turbo-opgraderingskits, der kører med øget boosttryk. Disse langtidsholdbare sølvtændrør vil præstere bedre end fabrikstandrør og anbefales som en performance-opgradering til en Stage 2 & 2+ Audi B8/8.5 S4/S5 & Q5/SQ5 3.0 TFSI, samt andre højtydende Audi og VW opsætninger. Installationsnote: Spænd til 20 - 30 Nm (18-21,6 ft.lb). Inden installationen skal du sikre dig, at terminalmøtrikken er stram.

Installation Effort: MILD

034Motorsport tændspoler er designet til at være en højere output, direkte plug-and-play-opgradering fra OE tændspoler med forbedret varmeafledning via de integrerede CNC-bearbejdede køleplader og tilbyder unik, farverig styling.

Sælges i enkelte mængder, pakker med 4, pakker med 5 og pakker med 6

Installationsindsats: MILDE

034Motorsport Street Density Motor Mounts for the B9/B9.5 Audi A4/A5 2.0 TFSI are a performance upgrade over the factory mounts, and are a suitable OE replacement for B9/B9.5 Audi S4/S5/SQ5 3.0 TFSI and B9/B9.5 Audi RS5 2.9 TFSI. Street Density Motor Mounts are manufactured with 50 durometer rubber to limit unwanted noise and vibration transfer into the cabin. Street Density Motor Mounts are void-free and fluid-free, eliminating the slop and excess movement associated with the factory mounts, resulting in improved shifting feel and driving dynamics while greatly improving long term durability and longevity.

Note: This mount has two different applications that are based on engine size (Street Density for 4-cyl 2.0T FSI and OE Replacement for 6-cyl 3.0T TFSI or 2.9 TFSI). Please see the Fitment Guide tab below for application information.

This performance polyurethane snub mount fits most Audi vehicles manufactured through 2001, and is designed to increase stabilization of the motor under acceleration. Our polyurethane snub mount is a direct replacement for the stock snub mount, and offers much longer life and drastically improved performance by reducing unwanted engine movement.

Secondary air injection blockoff plate set for V6 30V cylinder heads with the SAI system removed, perfect for those of you swapping SAI-equipped big port 2.8L 30V heads onto your 2.7T.

034Motorsport's Silicone Breather Hose Kit for the B5 Audi S4 and C5 Audi A6 2.7T is designed to replace the problematic factory "spider" breather hose assembly. This kit is manufactured from high-quality automotive silicone and features a modular design that is compatible with all factory breather configurations and can easily be used with an aftermarket oil catch can.

034Motorsport's Silicone F-Hose for the 2.7T is a direct fit for all APB engines with a factory f-hose. This part replaces the failure-prone factory rubber hose with our superior long-lasting silicone one to ensure years of tear-free, leak-free operation, even in high-boost applications.

New hose clamps are included!

This high-quality reinforced silicone hose allows for simple removal of the failure-prone after run coolant pump found on B5 Audi S4 and C5 Audi A6/Allroad models equipped with the 2.7T engine. Simply remove your auxiliary water pump and hoses, and replace them with this silicone hose. New hose clamps are included!

034Motorsport is proud to offer our Silicone Throttle Body Inlet Hose for the B8/B8.5 Audi S4/S5 3.0 TFSI!

This hose is designed to replace the corrugated plastic unit, our hose features larger internal area and smooth insides for higher flow and life long durability.

This durable, high quality silicone hose was modeled directly off of the factory part to ensure perfect fit and finish, extensively test fit here at our facility. In addition to cloth reinforcement, this hose features stainless steel wire reinforcement to ensure collapsing is not possible.

Snub Mount Bracket with poly mount that greatly reduces unwanted engine movement without excess vibration. Finished in black semi-gloss for OE look, and utilizes slotted holes to allow compliance in fit.

This performance polyurethane snub mount fits most late-model Audi vehicles manufactured after 2002, and is designed to increase stabilization of the motor under acceleration.

Our 70 durometer polyurethane snub mount is a direct replacement for the stock snub mount, and offers much longer life and drastically improved performance by reducing unwanted engine movement.

Snub Mount Bracket with poly mount that greatly reduces unwanted engine movement without excess vibration. Finished in black semi-gloss for OE look, and utilizes slotted holes to allow compliance in fit.

Snub mount bracket with included polyurethane snub mount designed specifically for B6/B7 Audi S4 4.2L V8 applications. Unlike other snub mount kits on the market that allow an "air gap" around the mount, our mount fits tightly inside the bracket for a tight precision fit.

The stock rubber 2.7T Throttle Body Inlet Boot is notorious for ripping and causing leaks, usually at the worst possible time. 034Motorsport's high quality silicone replacement is modeled off the factory hose to ensure excellent fitment, and has beefy 4-ply reinforced silicone construction to withstand increased boost pressures up to 22 PSI.

For applications running higher boost, we recommend using our 034Motorsport High-Flow Stainless Steel Bipipe Set.

Please Note: Some trimming of the MAP sensor provision may be required to fit the factory plastic engine cover, as the silicone is more robust than the flimsy factory rubber.

The stock rubber 2.7T Throttle Body Inlet Boot is notorious for ripping and causing leaks, usually at the worst possible time. 034Motorsport's high quality silicone replacement is modeled off the factory hose to ensure excellent fitment, and has beefy 4-ply reinforced silicone construction to withstand increased boost pressures up to 22 PSI.

For applications running higher boost, we recommend using our 034Motorsport High-Flow Stainless Steel Bipipe Set.

Please Note: Some trimming of the MAP sensor provision may be required to fit the factory plastic engine cover, as the silicone is more robust than the flimsy factory rubber.

2.7T Y-Pipe Hose Pair for S4 Y-Pipe and S4 inlet pipes, a direct replica of OEM S4 hoses but in reinforced high temperature silicone for long life and abuse resistance.

APR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark.

Suitable for the following engines:

- 1.8T EA888 Gen 1 (Requires 4x)
- 2.0T EA113 (Requires 4x)
- 2.0T EA888 Gen 1 (Requires 4x)
- 2.5 TFSI  Pre 2017 (Requires 5x)
- 3.0 V6 Supercharged (Requires 6x)
- 4.2 V8 FSI RS4 / RS5 etc. (Requires 8x)