Intercooler:
net dimension: 500x160x70mm
connection diameter: 65mm
total width 700mm

Downpipe:
2,5"/63,5mm Downpipe
fits to the serial turbo charger, Lamda port connect
!!! without technical certificate !!!

From year : 1997 - 2005
110+132kW, 1.8T

intercooler:
dimensions: net dimension 190x190x95mm
Inside -Outsidediameter: 2"" (50,8mm)

Downpipe:
2,5""/63,5mm decat downpipes set
with two braided flex tubes
Lamda port connect
model with v-band flange

Intercooler:
length: Dimensions 595mm x 400mm x 56mm
connection diameter: 73mm
max width: 950mm
max. height: 420mm

Downpipe:
3" Downpipe with catalyser
fits to the serial turbo charger
200 cell single cat, Lamda port connect
!!! without technical certificate !!!

Intercooler:
dimensions 595mm x 400mm x 56mm
connection diameter: 73mm
max width: 950mm
max. height: 420mm

Downpipe:
3" Downpipe, 4-pieces Set with Adapter
to the serial turbo charger,3 Lamda port connect.
modeltyp with ribbon clip

Intercooler:
length: Dimensions 595mm x 400mm x 56mm
connection diameter: 73mm
max width: 950mm
max. height: 420mm

Downpipe:
3" Downpipe, 4-pieces Set with Adapter
to the serial turbo charger,2 Lamda port connect.
modeltyp with clamp turbo oulet : 80mm
The holder is on the right in the direction of travel
- instead of in the middle of the pipe

Intercooler:
length: Dimensions 595mm x 400mm x 56mm
connection diameter: 73mm
max width: 950mm
max. height: 420mm

Downpipe:
3" Downpipe, 4-pieces Set with Adapter
to the serial turbo charger,2 Lamda port connect.
modeltyp with clamp turbo oulet : 80mm
The holder is on the right in the direction of travel
- instead of in the middle of the pipe

Intercooler:
ength: Dimensions 595mm x 400mm x 56mm
connection diameter: 73mm
max width: 950mm
max. height: 420mm

Downpipe:
3" Downpipe, 2-pieces Set with Adapter
to the serial turbo charger, Lamda port connect.
Modeltyp with ribbon clip
Without technical certificate !!!

Intercooler
dimensions / measurement 600x340x50mm

Downpipe:
connection diameter inlet: 2.5 ""
terminal outlet diameter: 3 ""
3"" Downpipe including gasket
fits to the serial turbo charger
outlet diameter: 2.5""/63,5mm

Intercooler:
dimensions / measurement 600x340x50mm

Downpipe:
3" Downpipe with catalyser and gasket
fit to the serial turbo charger
200 cell single cat, Lamda port connect
outlet diameter: 2.5"/63,5mm

Intercooler:
net dimension 550x150x150mm

Downpipe:
3"" Downpipe, 2-pieces Set
with Lamda port connect.
Connection diameter front: 84mm
connection diameter behind: 57mm inside
hole / bolt: 88 mm
length of tube 1 (cyl. 1-3) = 550 mm
length of tube 2 (cyl. 4-6) = 445 mm

Intercooler:
net diameter: 510 x 150 x 130mm
connection diameter: 61mm quickfit as OEM

Downpipe:
4"" catless downpipe with fitting for
regulating lambda probe + lambda monitor sensor
without rubber mounting
top diameter (V-band connection) 117mm outside,
rear connection dimension 62mm

Model from year : 07.2013 -

Intercooler
net dimension: 510 x 210/150 x 130 mm
connections: 61mm Quickfit like OEM

Downpipe:
100mm catless downpipe with fitting for
regulating lambda probe + lambda monitor sensor
model with N55 engine

Intercooler:
net diameter: 510 x 150 x 130mm
connection diameter: 61mm quickfit as OEM

Downpipe:
4"" catless downpipe with fitting for
regulating lambda probe + lambda monitor sensor
without rubber mounting
top diameter (V-band connection) 117mm outside,
rear connection dimension 62mm

Model from year : 07.2013 -

Intercooler
net dimension: 510 x 210/150 x 130 mm
connections: 61mm Quickfit like OEM

Downpipe:
100mm catless downpipe with fitting for
regulating lambda probe + lambda monitor sensor
model with N55 engine

Intercooler:
net dimension 550x150x150mm

Downpipe:
3"" Downpipe, 2-pieces Set
with Lamda port connect.
Connection diameter front: 84mm
connection diameter behind: 57mm inside
hole / bolt: 88 mm
length of tube 1 (cyl. 1-3) = 550 mm
length of tube 2 (cyl. 4-6) = 445 mm

Intercooler:
net dimension: 515 x 135 x 120mm
connection: 76mm Quickfit

Downpipe:
diesel soot particels spare pipe
outside diameter: 75mm
port diameter: 70mm
Note: Software of the motor must be adjusted accordingly
!!! without technical certificate !!!

Model from year : 07.2013 -

Intercooler
net dimension: 510 x 210/150 x 130 mm
connections: 61mm Quickfit like OEM

Downpipe:
100mm catless downpipe with fitting for
regulating lambda probe + lambda monitor sensor
model with N55 engine

Intercooler:
net diameter: 510 x 150 x 130mm
connection diameter: 61mm quickfit as OEM

Downpipe:
4"" catless downpipe with fitting for
regulating lambda probe + lambda monitor sensor
without rubber mounting
top diameter (V-band connection) 117mm outside,
rear connection dimension 62mm

Intercooler:
net diameter: 510 x 150 x 130mm
connection diameter: 61mm quickfit as OEM

Downpipe:
4"" catless downpipe with fitting for
regulating lambda probe + lambda monitor sensor
without rubber mounting
top diameter (V-band connection) 117mm outside,
rear connection dimension 62mm

Model from year : 07.2013 -

Intercooler
net dimension: 510 x 210/150 x 130 mm
connections: 61mm Quickfit like OEM

Downpipe:
100mm catless downpipe with fitting for
regulating lambda probe + lambda monitor sensor
model with N55 engine

Intercooler:
1 Set = left + right hand
Dimensions: 170x 120 x 140mm / Quickfit 63mm /
screwed side 95mm

Downpipe:
3 "/ 76mm downpipe with particle filter
Connection to the standard turbocharger
Metal cat with 2 Lamda connections
at the connecting tube
diameter to OEM connecting pipe 70mm

Intercooler:
1 Set = left + right hand
dimensions: 170x 120 x 140mm / Quickfit 63mm
screwed side 95mm

Downpipe :
3 "/ 76mm downpipe without catalyst
Connection to the standard turbocharger
Metal cat with 2 Lamda connections
at the connecting tube
diameter to OEM connecting pipe 70mm

Intercooler:
1 Set = left + right hand
Dimensions: 170x 120 x 140mm / Quickfit 63mm /
screwed side 95mm

Downpipe:
3 "/ 76mm downpipe with particle filter
Connection to the standard turbocharger
Metal cat with 2 Lamda connections
at the connecting tube
diameter to OEM connecting pipe 70mm

Intercooler:
1 Set = left + right hand
dimensions: 170x 120 x 140mm / Quickfit 63mm
screwed side 95mm

Downpipe :
3 "/ 76mm downpipe without catalyst
Connection to the standard turbocharger
Metal cat with 2 Lamda connections
at the connecting tube
diameter to OEM connecting pipe 70mm

Intercoler:
570 x 230 x 55/45mm / Quickfit 62mm / Lmax: 850mm / step intercooler

Downpipe:
diameter backside 70mm / V-Band mount 118mm / 2 x Lamdaport

Intercooler:
net dimensions 540 x 200 x 100mm with stage
dimension 735mm radiator support points
dimension 56mm hose connection

Downpipe:
stainless steel downpipe
2,5"/ 63,5mm, 2 lamda connection
dimension at the flange connection 78mm

Intercooler:
net dimensions 540 x 200 x 100mm with stage
dimension 735mm radiator support points
dimension 56mm hose connection

Downpipe:
stainless steel downpipe
2,5"/ 63,5mm, 2 lamda connection
dimension at the flange connection 78mm

Intercooler:
net dimensions 540 x 200 x 100mm with stage
dimension 735mm radiator support points
dimension 56mm hose connection

Downpipe:
stainless steel downpipe
2,5"/ 63,5mm, 2 lamda connection
dimension at the flange connection 78mm

Intercooler:
net dimensions 540 x 200 x 100mm with stage
dimension 735mm radiator support points
dimension 56mm hose connection

Downpipe:
stainless steel downpipe
2,5"/ 63,5mm, 2 lamda connection
dimension at the flange connection 78mm

Intercooler:
2 x intercooler
pipe fittings, mounting kit
max. width: 390mm
depth - cool rib: 86mm / max. depth 135mm
connection size round: 61mm inner diameter
hole spacing: 100mm

Downpipe:
external diameter: 85mm / 3.35""
with connection for lambda probe
including gaskets